Heavy Duty 24V Extra Long Stroke (Left & Right) Telescopic Linear Actuator | Swing Gate Automation

 

Heavy Duty 24V Swing Gate Left or Right  Automation with All Metalic gears, powerful and quiet operation. Easy to use manual override using the supplied key in an emergency. The system can handle light and heavy gates up to 175kg maximum weight or 3m maximum length (for each gate).

 

Emergency Clutch Override

Easy manual override in case of an emergency using the supplied key, slot in and turn clockwise to operate the gates manually.

Actuator Dimensions

Specifications

Installation Geometry

Pull to Open Installation

Before beginning installation, identify the left/right side motor. The manual override for the gate motor determines this.

The manual override should not be facing the gate to allow easy accessibility.

Push to Open Installation

Before beginning installation, identify the left/right side motor. This is determined by the manual override for the gate motor.

The manual override should not be facing the gate to allow easy accessibility.

Weatherproof Control Box

The CBSW24 series smart control panel is an easy to connect, simple to setup and feature rich control box vast amount of features as listed below:

Fully weatherproof with a seal
Pre Connected Weatherproof Glands for Wiring Connections
Hinged door with a padlock slot for added security

 

System Features

Standalone Solar System
High Capacity Battery System
Built In Solar Regulator
Automatic Setup Feature to learn the Ramp Up and Slow Down points of the gates
Automatic Feature Learning will learn all features of the remote with a simple pairing process
Ultra High Security Rolling Code remote system allows for the highest form of security for entry to your property
Adjustable Automatic Close time up to 3 minutes
Pedestrian Function allows for only one of the gates to be operated, this can be toggled by remote, keypad or push button
Second Motor Delay Time, the second gate motor can operate simultaneously with the first gate motor or be delayed by 3 to 5 seconds.
 

Safety Features

Adjustable Over current adjustments
Safety Sensor connection input
Automatic Courtesy Light Output

 

Special Features

Party mode: The automatic closing can be cancelled using button 3 on the remote control buttons when expecting a visitor to arrive, reversing a trailer and numerous other uses.
Service Gate Function (12V 250mA max.). Using the second lock output will allow the user to power and control a second electric striker installed on a pedestrian access gate the second lock is powered from the control panel and controlled using button 4 on the remote. APC Wired and wireless Accessories can also be use to control the Lock 2 function.

Accessories Compatibility

Constant 24V DC Accessories Output
Switched 24V DC Output for closing direction (used for safety devices to conserve power, powered on when required)
Open/Stop/Close Inputs for Single Gate Operation and Double Gate Operation
Smart Opening & Closing LED indicators: Green LED on during opening and Red LED on during the closing
Automatic Electric Lock Output

Controlling Options

Any or all of the following may be connected to operate the gate

Remote controls
Entry and Exit push button with isolation key switches (Wired and Wireless Options Available)
Keypads (Wired and Wireless Options Available)
Exit/entry sensors
Intercom system with dry contact output
Automatic switching timer
WiFi Control System (App Based Control)
GSM Control Systems (Mobile Call/SMS based Control)

24V 20 Watt Solar Panel (Upgradable to 20 Watt or 60 Watt options)

Mono Crystalline silicon solar cells with 3mm tempered glass and two sheets of tedlar-polyeaster-tedlar (TPT) and ethylene Vinyl acetate (EVA). This protects against moisture penetrating into the module. The solar panel is supplied with a fence mounting bracket system along with a pre-connected 5 metre cable (maximum cable distance is 20 metres), the solar panel is also fitted with a diode to prevent feed back from the batteries.

24V 9aH Battery System

Supplied with the automation kit, the 24V Battery System* (2 x 12V  9Ah Batteries) will allow for continued use of the gate system, whether day or night. The system can operate for up to one week of regular residential use without any charge from the solar panel (winter months/wet season) and will automatically recharge from sunlight. When the system batteries are fully charged, it will continue to float charge to keep the batteries topped up and ready for use. In the case of extended use requirements or higher duty, there are upgrade options to 17aH and 33aH battery systems.

 *Fully charged batteries will provide 27V and Cuts Off the system at 24V to improve AGM battery life

Remote Features

Specifications

APC Connect 4

 

The APC Connect 4 will allow all programmed users to ring the device from anywhere, at anytime with the ability to toggle the connected device to operate. If desired the unit can also be set to a public mode so that any telephone number to call in can toggle the operation.

The administrator/installer can easily adjust the method of operation and toggle from the systems features by sending simple SMS commands from there mobile phone.

 

How does it work:

1. An active sim card needs to be installed in the device. Using the sim card in this device will not incur more than the cost of keeping it active anything if you turn off alerts but the sim card needs to be active and able to receive incoming calls).
2. The device is then wired to the relevant system that needs to be operated and up to 200 users can be programmed through the use of quick SMS commands.
3. When any of these programmed numbers ring the device, it will ring once, reject the call and proceed to opening/closing the system. The device can be dialed from anywhere at any time by any of the programmed users.

 

Prerequisites:

An active Sim Card with good to excellent mobile coverage in the are the Connect 4 will be installed. The Sim Card cannot be a data Sim and must have an active telephone number.

Voicemail feature of the Sim Card must be disabled, The service provider (Telstra, Optus, Vodafone, Aldi etc.) can do this for you.

Features:

• Ring the system from anywhere in the world.
• PRIVATE MODE: Caller ID used for verification - unknown numbers are ignored.
• PUBLIC MODE: Any call or SMS in can operate the system
• Up to 200 authorized phone numbers can be configured at a time.
• SMS confirmation to an authorized phone number or master user when the system is triggered to OPEN/CLOSE or turn ON/OFF.
• Easy to configure the device by SMS.

Quick Reference Diagrams

APC-PE2000 Photoelectric Safety Sensor Set

The Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

Both sensors (transmitter and receiver) are wired back to the control box of the gate system using the supplied cable roll, alternatively a reflective sensor upgrade is available which will only require wiring from the sensor mounted at the control box.
 

• Up to 15 Metres Infared beam operating distance


• Only powers on when the command is given to close the gates


• Alignment led to assist in the installation process


• Weather sealed with the supplied cover seals


• Easy screw down wiring termination


 

65mm Rubber Gate Stop

The supplied 65mm rubber gate stop with a steel base is used for the gate alignment and tension whilst they are in the closed position; it also allows the gates to be mounted up to 50mm off the ground.

Being that the minimum vehicle height from the ground is 100mm, it will not interfere with the vehicle. In the case that the vehicle was lower than the typical minimum, the stopper would not cause any damage as it is constructed from solid rubber but retains its general strength from the steel plate used at the bottom side contacting the driveway.

 

 

65mm Rubber Gate Stop Dimensions