APC RX2 Two Channel Receiver

The APC two-channel receiver can be used on gates, garage doors regardless of the brand to allow for the entire APC wireless family of equipment such as remotes, wireless keypads, wireless push buttons, etc to operate the connected device.

Prerequisites

open/close, open/stop/close, OSC, PUSH, or any other input on the integrating system 12-24V AC/DC power (power adapter available for cases where this is not accessible.

There is no longer a need to carry multiple remotes as this simple solution would integrate all connected systems onto the one APC control system. The prerequisite of the system to accept the receiver is that it has a functional open/close terminal on its control card. Some systems will be labeled (open/close whereas others are labeled PUSH or OSC). In such a situation the button of your choosing on the remote would open and close the connected system based on its current position.

If the system has an input exclusively for the open command and another exclusively for the close command the receiver can still be used as it has two separate relay outputs and each output could connect to the exclusive command, this would mean that one button on the example remote would be for the open movement and another button on the remote would be for the close movement. In cases of side by side double garage doors, you can use the two outputs of the receiver to control each of the systems separately.

Other uses

The APC Smart two-channel receiver has a further feature of setting an output for latching circuit, this could be used to control systems to ON/OFF per button press such as lights, pumps, safety devices inputs, alarms, etc.

Package options

The receiver can be purchase in multiple package options such as

• Receiver only
• Receiver with a low voltage power adapter (in case power is not available for the device)
• Receiver and a two remote combo
• Receiver, power adapter and a two remote combo
• Receiver, wireless two feature entry keypad, wireless single feature exit button three remote combo
• Receiver, wireless two feature entry keypad, wireless two feature exit button three remote combo
• or any package can be made using any of the APC compatible devices

Compatible devices

• APC-RC4S Four Button Keyring remote
• APC-RC4-SV Four Button Sun Visor Remote (six colour choices)
• APC-RC450S Long Distance Remote
• APC-KP2W Two Channel Wireless Keypad APC-KP2W
• APC-PBS-KW Single Wireless Button with Isolation Key
• APC-PBD-KW Double Wireless Button with Isolation Key
• ANT-1 External Boosted Antenna

Specifications

• 433.92Mhz High-Security Rolling Code compatible with APC devices
• Dual Mode Receiver with momentary and latching modes
• Normally Open and Normally Closed circuits
• Supports 12-24V AC/DC
• Single Remote Delete or Full Format
• Max switching load 24VDC/2A

APC-KP2W Wireless Keypad Features

• Up to 11 pin codes can be programmed


• Low Power Consumption only 18uA in standby.


• Easy to replace AA battery-powered system (supplied) with up to two years usage on general use.


• High strength tempered glass faceplate with an ultra-modern and highly reliable touch-sensitive operation.


• Blue Backlight illumination upon touch with an automatic timeout to return to standby.


• Two dedicated LED indicators indicating and accepted pin code (green) and also security lockout (red)


• IP53 Weatherproof rated and suited for outdoor and indoor environments.


• Built in Anti Tamper alarm and security lockout to help prevent theft and unauthorized usage.


• Pin code scramble allowing the user to input a series of random number before the pin code to prevent pin code theft.


 

Wireless Push Button with Isolation Key

The wireless push button switch is a simple and easy to use method to operate the gate. It is mounted in the general area of the gate and can be isolated by using the supplied keys without affecting the rest of the system, this is handy if you want to continue using the remotes or any other method of operation but wish to stop use of the push button itself.

The push button can be used for over 50 metres in operating distance.

APC Automation Systems FOUR Button Keyring Remote Control

Four-button remote control transmitter used for:

• APC Swing Gate Systems
• APC Sliding Gate Systems
• APC Boom Gate Operating Systems
• APC receivers

Features

• Featuring High Security rolling codes transmitting a unique code chosen at random
• Slim design
• Keyring Clip-on System
• Completely Backwards Compatible with all legacy APC control boards

Compatible Equipment

Ready to clip onto your keyring

Pairing Videos

APC Automation Systems FOUR Button Long Distance Remote Control

Four-button remote control transmitter used for:

• APC Swing Gate Systems
• APC Sliding Gate Systems
• APC Boom Gate Operating Systems
• APC receivers

 

Features

 

• Featuring High Security rolling codes transmitting a unique code chosen at random
• Extendable Antenna
• ON/OFF Safety Switch
• Up to 400m in perfect line of sight and up to 800m when control box is using ANT-1 External Antenna
• Completely Backwards Compatible with all legacy APC control boards

Compatible Equipment

Pairing Videos

WARNING: Please note this product is for use with the APC gate automation systems and will not work with other brands.

APC Booster 433mhz Antenna

 

The APC booster antenna is suitable for gate automation systems, garage doors, receivers and other devices using the 433mhz or 433.92mhz radio frequency band.

As a general rule of thumb on a properly functioning system, you can expect to see results of doubling the range of the transmitter.

The antenna can also help in resolving issues where the transmitter range is decreased due to installation methods such as a receiver being behind a metal fence, brick pillar, metal box, and numerous other range-decreasing factors

Compatible devices

• APC-RC4S Four Button Keyring remote, up to 80m operating distance
• APC-RC4-SV Four Button Sun Visor Remote (six colour choices), up to 100m operating distance
• APC-RC450S Long Distance Remote, up to 800m operating distance
• APC-KP2W Two Channel Wireless Keypad APC-KP2W, up to 40m operating distance
• APC-PBS-KW Single Wireless Button with Isolation Key, up to 10m operating distance
• APC-PBD-KW Double Wireless Button with Isolation Key, up to 10m operating distance
• APC-PBS-KW (2nd Generation) Single Wireless Button with Isolation Key, up to 100m operating distance
• APC-PBD-KW (2nd Generation) Double Wireless Button with Isolation Key, up to 100m operating distance

Specifications

• Suits all 433MHz and 433.92MHz motors
• Can potentially double the specified operating range
• 5m RG58 Pre-wired Coaxial Cable
• Stainless Steel Mounting Bracket
• Long Range 6.5dbi

Prerequisites

• A properly working system achieving current transmitter limitations
• A system working on 433mhz or 433.92mhz
• An Antenna port connection or an existing internal antenna to connect to