|| Early Black Friday Sale Code: BF24 / STOREWIDE EXTRA 5% OFF || STORE WIDE FREE SHIPPING || WGO AUTOMATIC GATE OPENER SYSTEMS WITH SECURE GATE ACCESS CONTROL OPTIONS ||
0
|| Early Black Friday Sale Code: BF24 / STOREWIDE EXTRA 5% OFF || STORE WIDE FREE SHIPPING || WGO AUTOMATIC GATE OPENER SYSTEMS WITH SECURE GATE ACCESS CONTROL OPTIONS ||
0
Product SKU: T500
Complete Telescopic Gate System incl. Pulley Carriers, brackets and Stainless Steel Cables
| This is a complete telescopic sliding gate installation kit with all the parts required for a telescopic sliding gate opening up to 8.5m.
This kit does not include the hardware required to make each of the gates slide individually but they are available separately and also in a bundle. Consisting of Galvanized steel pulley carriers with sealed bearings this kit allows the final tensioning of the system to be performed from either (or both) ends of the gate rather than between the gates like conventional kits.
What is a Telescopic Gate:A telescopic gate is a gate designed in two halves with a leading and a trailing gate. The leading gate will be the gate closest to the inside of the property whereas the trailing gate is the gate that is closest to the street. Typically a sliding gate would require the width of the driveway + the tail of the gate (350mm) as the minimum clear area required however the telescopic gate system only requires half the driveway width + the tail of gate (350mm). This makes a telescopic gate superior in clearance space required and beneficial for townhouses, blocks of units and any other installation with limited space. Using the information above if the driveway width is 4000mm then each gate would be manufactured to 2350mm thus making 2350mm the required clearance space. Ideally an additional 150mm would be ideal for a ground stop installation making the preferred clearance space 2500mm |
||||||
Clydsdale 500 Kit Contents2 x Adjustable Pulley Carrier (Pre-Assembled with Sealed Bearing) 1 x Gate to Cable Bracket (Trailing Bracket) 1 x Anchor Bracket for Bolt-On Wheel Type 1 x Lowering Bracket for Recess Wheel Type 1x 10m Stainless Steel Cable (4mm) 12x Self Drilling Tek Screws (M6) 4 x Countersunk Self Drilling Screws (M6) 4x Dynabolts (M8) 1x Comprehensive Installation Guide |
||||||
Key Features of Telescopic Gate:
F.A.QQ: Can the telescopic system be under mounted?A: Yes, Due to the design of the pulley carriers 4 Lug rear side fixing the carrier can be installed to the bottom of the gate without any need to remove the gate during the installation process. Q:What size tubing will the system fit to? A: The carrier system can be installed onto a large variety of different size tubing's such as to 40x40, 80x40, 50x50, 75x50 and 100x50. Q: What is the maximum size PER gate? A: The maximum size of each gate can be up to 4600mm including the 350mm overlap. Q: What should each gate width be? A: Divide the width of your driveway in half and add 350mm to the measurement. This is the final width of each gate. Q: Will the system be visible from the street? A:Initially when face installed the cable will be visible, it is highly recommended to have one of the following methods applied to cover the cable for safety and aesthetics. - Enclosure on the gate face during fabrication process ready to fit after complete installation. - Flashing folded to size ready to install after complete installation. Q: Will i receive instructions? A: Yes you will receive a comprehensive clear english manual which will give clear instructions about the design of the gate all the way through to installation and parts placement. |
||||||
Telescopic Gate System Hardware |
||||||
|
